Limited Time Offer!
Selling Price -CALL FOR PRICING
Selling Price -
CALL FOR PRICING
2024 Exmark Lazer Z S-Series LZS801CKA72RA1
With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
Features may include:- Less Time At The Pump
- On-Board Diagnostics
- Ultracut Series 4 Deck
- Built to Last
- Fewer Grease Points
- Tool-less Belt Removal
- 2024
- Exmark
- Lazer Z S-Series
- LZS801CKA72RA1
- Zero-Turn Mower
- Model: FX801V | Series: V-Twin | Spec: _S04
- Heavy-duty canister air filtration system
- 852
- Kawasaki
- 3,750 RPM
- Fuel Indicator: Electronic Sender
- Gas Carbureted
- Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Lever-actuated disc brake.
- 24 x 12.0-12, 4-ply Turf Master® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
- 24 x 12.0-12, 4-ply Turf Master®
- 12-volt battery with 15-amp alternator.
- Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
- Blade: Approximately 18,500 fpm.
- Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Casters: .50" thick caster yoke arms.
- Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
- Deck: 72"
- Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
- Blades: 3 Blades at 24.50" | 86.1 in. (218.7 cm)
- 78.2 in. (198.6 cm)
- 12-gallon (45.4-L), single fuel tank with single fill location.
- Curb: 1359 lbs
- Smart Controller | Engine hour meter and cup holder | UPC: 193308119717 | Carb Compliant | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
- Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
- 416237798
- 72
- Lawson, Missouri
- New
- EX-LAZS72-7798
- 2024
- Exmark
- Lazer Z S-Series LZS801CKA72RA1
- Model: FX801V | Series: V-Twin | Spec: _S04
- Gas Carbureted
- Available
- 78.2 in. (198.6 cm)
- Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
- 416237798
- 72